ALD2722EPBL Overview
The linear amplifier is packaged in a 14-DIP (0.300, 7.62mm) case. There are two types of operational amplifiers in this circuit. The case in which buffer amplifier is delivered is called a Tube case. In total, the buffer amplifier consists of 14 pins. In terms of input offset voltage, operational amplifier rates 25μV. Through Hole is the recommended mounting type for this linear amplifier. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . An 2mA volt supply current is needed for this linear amplifier to operate. The voltage gain should stay at 107.96dB. On this buffer amplifier, there are 2 circuits. Instrumentation amplifier has 2 channels on it. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. This instrumentation amplifier cannot operate below 0°C degrees Celsius. Use op amp only at temperatures no higher than 70°C. The operating supply voltage of instrumentation amplifier is rated 5V voltage. This electronic part is recommended to be used with an 2mA supply for best performance. As a rule of thumb, you should conduct this electronic part under a dual voltage supply of 5V volts. Buffer op amp series numbers are indicated by the EPAD?.
ALD2722EPBL Features
107.96dB voltage gain
Output Type: Rail-to-Rail
ALD2722EPBL Applications
There are a lot of Advanced Linear Devices Inc. ALD2722EPBL Instrumentational OP Amps applications.
- Video computer boards
- RF cable systems
- Radar
- Automatic control
- High gain DC amplifier
- Large motor controllers
- earphone
- Instrumentation
- Proportional counter tubes
- ECG equipment
