ALD2711SAL Overview
There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. A General Purpose-type buffer amplifier is shown here. Linear amplifier is delivered in a Tube case. In total, the buffer amplifier consists of 8 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 800μV. Surface Mount is the recommended mounting type of operational amplifiers. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of 0°C~70°C . An 200μA volt supply current is needed for this linear amplifier to operate. It is a member of the 109.54dB's 109.54dB family. A instrumentation amplifier like this has 2 circuits. There are 2 channels on the operational amplifiers. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. This instrumentation amplifier cannot operate below 0°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 70°C. The operating supply voltage of the buffer op amp is rated at 5V. As a result, it is recommended that a power supply of 200μA be used with this electronic part. There should be a dual supply voltage of 6V for you to conduct this electrical part.
ALD2711SAL Features
109.54dB voltage gain
Output Type: Rail-to-Rail
ALD2711SAL Applications
There are a lot of Advanced Linear Devices Inc. ALD2711SAL Instrumentational OP Amps applications.
- Video data acquisition
- single/dual op amp sum and difference circuits
- Precision measurement
- Voltage regulation circuit
- RF cable systems
- Biopotential
- Weighing systems
- High gain DC amplifier
- Navigation
- Signal filtering
