ALD2502SBL Overview
A 14-SOIC (0.154, 3.90mm Width)-shaped packaging surrounds the digital timer. There is 2.5MHz frequency set on the programmable timer.It is used to pack in Tube case. A mounting type of Surface Mount is recommended.When a programmable timer is configured to operate at 2V~12V volts, the voltage that is supplied can be 2V~12V.The type of chips can be divided into 555 Type, Timer/Oscillator (Dual). The operating temperature of this timer clock is 0°C~70°C. To mount this digital timer with Surface Mount. To keep the clock timer's supply current at 100μA. The operating supply voltage is rated at 100μA voltage. The minimum operating temperature of the chip must not be lower than 0°C. It's best to use the timer clock when the temperature is below 70°C. The timer clock contains 14 pins. The minimum supply voltage of the chip must not be lower than 2V. The supply voltage of this chip should not exceed 12V. The number of Timers/Counters on the device is 2.
ALD2502SBL Features
Operate frequency at 2.5MHz
Package / Case: Tube
Mounting Type:Surface Mount
Current - Supply：100μA
Max Operating temperature at 0°C
2 Timers/Counters
ALD2502SBL Applications
There are a lot of Advanced Linear Devices Inc. ALD2502SBL Programmable Timers & Oscillators applications.
- Safety and Security Platforms
- White Goods
- Internet of Things (IoT)
- Periodic “Wake-Up” Call
- Home Automation Sensors
- Remote current sensor
- Battery-Powered Systems
- Thermostats
- Precision timing
- Domestic appliances
