ALD2332BPAL Overview
The product is packaged in 8-DIP (0.300, 7.62mm) in order to facilitate transportation.Output type of this comparator is CMOS, NMOS, Push-Pull, TTL .The part is shipped by Tube .This is a typical comparator of type General Purpose .Currently, it consists of only 2 elements.In general, mounting type Through Hole is recommended.Ideally, the operating temperature should be set at 0°C~70°C in order to prevent malfunction.A quiescent current of 500μA is observed in this comparator.A Through Hole is provided for mounting it onto a PCB or another board.Normal use of the device should require a nominal supply current of 500μA .An excess of current supply over 500μA could result in malfunction of the comparator.You are allowed to input a maximum current of 20pA into the device.The voltage gain of the part is indicated by 103.52dB in the voltage formula.The part belongs to the EPAD® series of comparator parts.
ALD2332BPAL Features
CMOS, NMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 500μA
Voltage Gain: 103.52dB
ALD2332BPAL Applications
There are a lot of Advanced Linear Devices Inc.
ALD2332BPAL linear comparators applications.
- Self-diagnostics
- Lithium ion battery monitoring
- Battery management and protection
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
