ALD2331APAL Overview
For convenience, it is packaged in 8-DIP (0.300, 7.62mm) .There is a CMOS, NMOS, Open-Drain, TTL output type for this comparator.Electronic comparator is shipped by Tube .The type of the chip can be classified as General Purpose .Electronic comparator consists of 2 elements in total.Electronic comparator has 8 pins.The recommended mounting method is Through Hole .Electronic comparator is recommended that you set the operating temperature to 0°C~70°C in order to prevent malfunctions.The comparator has a pin count of 8 .As a result, this comparator displays a quiescent current of 180μA .This component has a Through Hole mount for mounting to PCBs or other boards.Normally, the nominal supply current should be 180μA when using the device.A supply current exceeding 180μA may result in the comparator malfunctioning.Comparator electronics is clear from the voltage formula that the voltage gain of the part is 103.52dB .A comparator part from the EPAD® series is used in this part.
ALD2331APAL Features
CMOS, NMOS, Open-Drain, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 180μA
Voltage Gain: 103.52dB
ALD2331APAL Applications
There are a lot of Advanced Linear Devices Inc.
ALD2331APAL linear comparators applications.
- Lithium ion battery monitoring
- Battery management and protection
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
