ALD1706SAL Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. Op amps are General Purpose types of amplifier on the chip. Instrumentation amplifier is delivered in a Tube case. 8 pins are available on the instrumentation amplifier. Op amp rates 4.5mV as input offset voltage. For this electronic part, it is recommended that you mount it with type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about 0°C~70°C . An 20μA volt supply current is needed for this linear amplifier to operate. 100dB should be the voltage gain. There are 1 circuits on this op amp. There are 1 channels on the operational amplifiers. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. Using this buffer op amp requires a temperature of at least 0°C. At temperatures greater than 70°C, Instrumentation amplifier should not be used. The operating supply voltage of the buffer op amp is rated at 5V. As a recommendation, this electronic component should be used with a power supply that can deliver 20μA. This electrical part should be conducted under the dual supply voltage of 6V volts when you conduct this part.
ALD1706SAL Features
100dB voltage gain
Output Type: Rail-to-Rail
ALD1706SAL Applications
There are a lot of Advanced Linear Devices Inc. ALD1706SAL Instrumentational OP Amps applications.
- Measurements of Wheatstone bridge
- Radiation thermometry transducers
- Strain gauges
- Video computer boards
- Portable docking station
- Proportional operation circuits
- Television
- Non-polarized electrodes
- Power control
- Exponential operation circuits
