ALD1706BSAL Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. The instrumentation amplifier in this picture is of the General Purpose-type. In the case of Tube cases, linear amplifier will be delivered. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 2mV. For this electronic part, it is recommended that you mount it with type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . You can run this op amp ic on 20μA . 100dB should be the voltage gain. There are 1 circuits on this op amp. There are 1 channels on the operational amplifiers. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. The temperature should not be lower than 0°C for operational amplifier ics to operate. Instrumentation amplifier shouldn't be used above 70°C . The operating supply voltage of the buffer op amp is rated at 5V. It is recommended that this electronic component be used with an 20μA supply. It is recommended that you conduct this electronic part using the dual supply voltage of 6V.
ALD1706BSAL Features
100dB voltage gain
Output Type: Rail-to-Rail
ALD1706BSAL Applications
There are a lot of Advanced Linear Devices Inc. ALD1706BSAL Instrumentational OP Amps applications.
- Large motor controllers
- Precision measurement
- Thermocouples
- Digital cameras
- Mobile phone
- pH (acidity)
- Voltage regulation circuit
- Cinema or auditorium audio system
- Oscilloscopes
- Non-polarized electrodes
