ALD1706BPAL Overview
Packaging for the buffer amplifier is in the form of a 8-DIP (0.300, 7.62mm) case. An op amp of this type is a General Purpose-type. Instrumentation amplifier is delivered in a Tube case. In total, the buffer amplifier consists of 8 pins. Op amp rates 2mV as input offset voltage. Through Hole is the recommended mounting type of operational amplifiers. According to the manufacturer, this buffer op amp works well at 0°C~70°C , which is a good operating temperature. The buffer amplifier is capable of operating from a supply current of 20μA . Keeping the voltage gain at 100dB is the best course of action. There are 1 circuits on this op amp. On the buffer amps, there are 1 channels that can be used. On the output type, there are Rail-to-Rail different types of op amps. For this linear amplifier to work, the temperature should not be below 0°C. You should not use op amp above 70°C degrees. The operating supply voltage of instrumentation amplifier is rated 5V voltage. It is recommended that this electronic component be used with an 20μA supply. Conduct linear amplifier under the dual suuply voltage of 6V.
ALD1706BPAL Features
100dB voltage gain
Output Type: Rail-to-Rail
ALD1706BPAL Applications
There are a lot of Advanced Linear Devices Inc. ALD1706BPAL Instrumentational OP Amps applications.
- Radar
- Voltage regulation circuit
- Home audio systems
- Image computer boards
- Multiplication circuits
- Displayers for aircraft and air transportation control systems
- Television
- Hand-held batteries
- Differentiator circuits
- Integrator circuits
