S-1000N45-I4T1U Overview
This power management consists of 4 mounting terminals on which it can be mounted. A Tape & Reel (TR) package is used to package the power management. There are 1 functions included in this PMIC so that you can refer to them. This power management is made up of 1 channels which are available in a series format. There are 4-SMD, Flat Leads functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC management and other Voltage Detector products. Specifies a reflow peak temperature of 260 for the package during reflow. In a 1.2V supply voltage, the power management conducts. A supply voltage of 1 is used to conduct the PMIC chip. A total of 4 pins are located on this power management. Surface Mount is the recommended mounting type. You should set the supervisor's temperature during -40°C~85°C TA . There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. The IC power comes from the well-known S-1000 series.
S-1000N45-I4T1U Features
Voltage Detector type
S-1000N45-I4T1U Applications
There are a lot of ABLIC U.S.A. Inc. S-1000N45-I4T1U Voltage Supervisors applications.
- Embedded computing
- Battery cars
- Electronics installed in the vehicle
- Radio
- Detection of phase loss
- Insulation fault location system
- Leakage current detection
- Microcontroller system
- Telecommunications equipment
- Urban rail transit weak current power monitoring
