S-1000C40-I4T1U Overview
Power management is mounted through 4 terminals. It is packaged with Tape & Reel (TR). Please refer to this PMIC for 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of 4-SMD, Flat Leads functions. This IC power shares lots of benefits with other Voltage Detector products. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 1.2V volt supply. During operation, the power ic is supplied with a voltage of 1. Taking into account all of the pins, this power management has a total of 4. The recommended mounting type for IC management is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. As well as this, there are other features to mention such as [0], for example. The IC power that you are looking at comes from our well-known S-1000 series product line.
S-1000C40-I4T1U Features
Voltage Detector type
S-1000C40-I4T1U Applications
There are a lot of ABLIC U.S.A. Inc. S-1000C40-I4T1U Voltage Supervisors applications.
- Digitally controlled LDO regulators circuit
- Utility meter
- Detection of phase loss
- Display equipment
- External alarm
- Computer applications
- Important electronics for automotive protection
- Refrigeration
- Dash board
- Household appliances
