16 X 16 MULTIPLIER; 32 X 16 DIVIDER; TWO STANDBY MODES
HTS Code
8542.31.00.01
Terminal Position
DUAL
Peak Reflow Temperature (Cel)
NOT SPECIFIED
Supply Voltage
5V
Terminal Pitch
2.54mm
Frequency
25MHz
Time@Peak Reflow Temperature-Max (s)
NOT SPECIFIED
Base Part Number
Z86C93
Pin Count
40
Qualification Status
Not Qualified
Operating Supply Voltage
5V
Interface
EBI/EMI, UART, USART
Oscillator Type
Internal
Number of I/O
24
RAM Size
236 x 8
Memory Type
CMOS, ROMless
Voltage - Supply (Vcc/Vdd)
3V~5.5V
uPs/uCs/Peripheral ICs Type
MICROCONTROLLER
Core Processor
Z8
Program Memory Type
ROMless
Core Size
8-Bit
Connectivity
EBI/EMI, UART/USART
Bit Size
8
Access Time
25 μs
Has ADC
NO
DMA Channels
NO
Data Bus Width
8b
PWM Channels
NO
DAC Channels
NO
Address Bus Width
16
ROM (words)
0
CPU Family
Z8
Boundary Scan
NO
Low Power Mode
YES
Format
FIXED POINT
Integrated Cache
NO
RAM (words)
256
Number of Serial I/Os
1
Number of Timers
3
Number of External Interrupts
4
On Chip Data RAM Width
8
Length
52.325mm
RoHS Status
Non-RoHS Compliant
Lead Free
Contains Lead
Z86C9325PSC Product Details
Z86C9325PSC Overview
Packaged in a 40-DIP (0.620, 15.75mm) format. A total of 24 I/Os are on the Microcontroller. Through Hole is the mounting type of the Microcontroller that is attached to the panel. This Microcontroller is based on a core called 8-Bit. The type of its program memory is ROMless. In this Microcontroller, temperature is controlled within the range 0°C~70°C TA. A Z8® series electrical component is used in this application. With a Z8 Core Processor, Microcontroller is fast and efficient. ICs for MICROCONTROLLER uPs/uCs/peripheral parts. There are 40 terminations on the IC chip, which means there are 40 terminations on the integrated circuit chip. In addition, MCU chip comes with a 8-bit size. Microcontroller chip has outputs of 5V volts. The system has NO channels for DMA communication. Alternatives can be found by searching through the base part number Z86C93 to find them. At a frequency of 25MHz, Microcontroller can operate efficiently. This MCU Chip uses NO PWM channels to operate. Chips have 40 pins. In total, it has 40 pins. The Z8 CPU family is embedded in the device, so it can handle a wide range of operations. The equipment has a CMOS, ROMless memory that is built in. As an example, one of the additional features that you can use is 16 X 16 MULTIPLIER; 32 X 16 DIVIDER; TWO STANDBY MODES. As part of the part, 1 serial I/Os have been incorporated. In addition to the internal interrupts, the part includes 4 external interrupts. An integrated circuit with 3 bits has a total of 3 bits.
Z86C9325PSC Features
40-DIP (0.620, 15.75mm) package Mounting type of Through Hole
Z86C9325PSC Applications
There are a lot of Zilog Z86C9325PSC Microcontroller applications.