TPS3800G27DCKRG4 Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. It is packaged with Tape & Reel (TR). To assist you, this IC power includes 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. For your reference, this PMIC includes a list of 5-TSSOP, SC-70-5, SOT-353 functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 260 is specified for the package. IC management conducts in a 3.3V-voltage supply. When 1 is applied to the power ic, it conducts. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. 5 pins are present in total in this power management. This power management has 5 pins. Supply voltage (Vsup) should be at least 1.6V for this power management. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 4V volts. Surface Mount mounting is recommended. The supervisors should be set to the following temperature: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. There is a 9μA supply current present in the power management. You can always use TPS3800, the base supervisor number, to search for similar PMICs of the manufacturer. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 18μA.

TPS3800G27DCKRG4 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.6V
9μA operating supply current

TPS3800G27DCKRG4 Applications

There are a lot of Texas Instruments TPS3800G27DCKRG4 Voltage Supervisors applications.

• WiFi router
• Dash board
• Unattended substation automation
• Insulation fault location system
• Personal computers
• Embedded computing
• Low voltage/high power - AI, GPU
• Stable power system
• Analog circuit
• Leakage current detection