ROHM's BD768xFJ-LB quasi-resonant controllers are designed to drive SCT2H12NZ silicon carbide (SiC) MOSFET, increasing power efficiency in switch-mode power supplies.
ROHM's DC/DC buck converter with integrated 80 V MOSFET optimized for high-power applications such as motors, communications infrastructure, and industrial machinery.
ROHM's BD71805MWV utilizes power supply technology cultivated for mobile applications to optimize circuit configuration for the i.MX 6SoloLite processor.
ROHM's BD9G341A is a high-voltage buck regulator featuring over-current protection, over-voltage protection, under-voltage lockout, and thermal shutdown.
ROHM's BD9E100FJ-LB and BD9E101FJ-LB are synchronous buck switching regulators with built-in power MOSFETs. These are capable of an output current of up to 1 A.
ROHMs low quiescent current regulators features a rated voltage of 50 V, 200/500 mA output current and an output voltage accuracy of ±2%.
Rohm's BD9E101FJ-LB is a synchronous buck switching regulator with built-in power MOSFETs. It is capable of an output current of up to 1.0 A.
Rohm’s 18 VIN synchronous bucks feature integrated FET’s in pin-compatible 3 A, 4 A, 5 A and 6 A packages.
ROHM is a leading manufacturer of SiC technology that enables higher efficiency and higher thermal conductivity in high voltage designs.
ROHM Semiconductor BU520xx series omnipolar hall ICs are magnetic switches that can operate both S-and N-pole, upon which the output goes from hi to low.
Rohm's BH1745NUC is a digital color sensor IC with I²C bus interface for sensing red, green, and blue light (RGB), and converts them to digital values.
ROHM Semiconductor's BD9E100FJ-LB is a synchronous buck switching regulator with built-in power MOSFETs.
ROHM Semiconductor's BD9E300EFJ-LB and BD9E301EFJ-LB are synchronous buck switching regulators with built-in power MOSFETs.
ROHM’s new BD14000EFV-C self-contained cell balancing IC utilizes a shunt resistor method for EDLC cell balancing operation.
Rohm Semiconductor's BD9E151 DC/DC converter features a wide input range of 6 V to 28 V and is capable of providing up to 90% efficiency.
Rohm's BD4xxMx and BD4275 Automotive Grade LDOs optimized for MCU power supplies
ROHM's synchronous step-down regulators have built-in low-on-resistance power MOSFETs are capable of providing up to 3 A of output current
ROHM's SiC power modules combine SiC MOSFETs and SBDs into a standard industrial package that has low-stray inductance and low-switching losses.
ROHM's UV sensor that can withstand UV intensity both indoors and outdoors in smartphones, watches, gaming, and in other consumer applications.
BD91x regulators utilize SLLM and synchronous rectification to allow for low power consumption and high efficiency under all load conditions.