Bourns PortNote® solution illustrates how a polymer PTC can protect the DC bus during short circuit testing as recommended by USB 3.1 Section 220.127.116.11.1.
Nichicon’s UCH series is a -40⁰C to 125⁰C low impedance surface mount aluminum electrolytic capacitor featuring a low temperature ESR specification.
Soft termination MLCCs from TAIYO YUDEN are AEC-Q200 qualified capacitors with improved resistance to bending of substrate due to soft termination.
Schaffner's FN3310 / FN3311 series are used to positively influence the conducted emissions on the grid side to help to comply with the required emission standards
Schaffner's FN2211 / FN2210 series are used to positively influence the conducted emissions on the panel side of the system and an optimum fit with most modern PV inverter generation
TDK Corporation offers their high temperature resistant MLCCs with soft terminations, expanding the CGA series of MLCCs for automotive applications
Skyworks SKY13522-644LF, SKY13523-639LF, and SKY13524-639LF high isolation switches are designed for switching single-ended Rx SAW filters in cellular handsets.
TDK's TFM201610ALM series power inductors are miniature, low-profile, thin-film, metal, magnetic inductors for power circuits featuring up to twice the rated current and half the DC resistance of comparable ferrite inductors.
TDK's TCM0403R series supports the high-density mounting of electronic components and contributes to significant space-savings in electronic devices
TDK has developed a series of multi-layer power inductors for use in near field communication (NFC) and power line applications
TDK's FG series is a high reliability consumer/automotive grade, halogen-free ceramic capacitors with dipped radial leads
Nichicon’s UCV series is a small sized low impedance surface mount aluminum electrolytic capacitor.
Murata’s two series of supercapacitors (EDLCs), which are the DMT series and the DMF series, feature the lowest levels of ESR throughout the industry.
Kemet's automotive grade, high voltage, high temperature surface-mount MLCCs meet the demanding AEC-Q200 qualification requirements.
TDK’s MCZ Series Common Mode Filters were designed for use in high-speed and ultra-high-speed differential signal lines.
TDK has developed the ACT45R type common mode filter for FlexRay systems.
TDK’s MMZ Series ferrite chip beads are used to suppress noise in both signal and power supply circuits.
TDK’s MPZ Series ferrite chip beads are used to suppress noise in both signal and power supply circuits.
TDK’s MMZ-E Series ferrite chip beads are used to suppress noise in both signal and power supply circuits.
The Syfer range of feedthrough MLCC chip ‘C’ filters are 3 terminal chip devices designed to offer reduced inductance compared to conventional MLCCs when used in signal line filtering.