3M's Scotch Tape 35 is based on polyvinyl chloride (PVC), has a rubber-based, pressure-sensitive adhesive, and is available in ½” and ¾” widths in nine fade resistant colors for easy color coding.
Analog Devices' ADPD2210 is a low-noise current amplifier designed to allow the use of smaller photodiodes by amplifying sensor signal currents by a factor of 24 while adding minimal noise.
LSP10GIHP-series surge protection modules, from Littelfuse, provide maximum transient over-voltage protection for outdoor and commercial LED lighting fixtures.
Vishay's SiR638DP offers a best-in-class combination of RDS(ON) and output capacitance (Coss), for reduced system power losses.
Memory Protection Devices, Inc. (MPD) introduces its battery holders for CR2032 cells (part numbers BQ2032-3 and BQ2032-6).
Johanson Technology’s zero-clearance metal-mounted antenna is designed for small coin cell, IoT, 2.4 BLE, wearable, ISM, Zigbee, and 802.11 applications in close-range networks.
Bosch's BME280 is an integrated environmental sensor developed specifically for mobile applications where size and low-power consumption are key design constraints.
Vishay’s high current-density surface-mount TMBS rectifiers in low-profile SlimDPAK package with typical height of 1.3 mm.
FTDI's CleO35A is a smart TFT display shield for Arduino can be easily programmed to give professional looking HMI/GUIs with no prior knowledge of complex graphics programming.
TDK its series of EPCOS z-axis Z transponder coils for passive entry, passive start (PEPS) car access systems with dimensions of 7.7 mm x 7.4 mm x 2.65 mm.
Texas Instruments' TPS92515 internal N-channel MOSFET (monolithic NFET) hysteric control, buck regulators are suitable for implementing step-down LED drivers.
NKK’s SS-series ultra-miniature slide switch features both illuminated and non-illuminated options.
Diodes' AP3301 is a peak-current control quasi-resonant (QR) PWM controller optimized for high performance, low standby power and cost-effective offline flyback power supplies.
The Cypress CYBLE-214009-00 is a fully certified and qualified module supporting BLE (Bluetooth® Low Energy) wireless communication.
The DSC1101 and DSC1121 series of high-performance oscillators from Microchip Technology utilizes a proven silicon MEMS technology to provide excellent jitter and stability.
IDT's PCIe® clock buffers and generators are the 3.3 V members of their full-featured PCIe family.
TI’s ADS8681, SAR ADC data acquisition system is designed for applications that include test and measurement and battery pack monitoring.
TI’s LMR23610/25/30 devices feature precision enable and internal soft-start which provide a flexible and easy-to-use solution for a wide range of applications.
Texas Instruments' bq77905 low-power battery protector is designed for applications that include power tools, garden tools, and start-stop battery packs.
Vishay Intertechnology introduces the IFLR series of low-profile, high-current inductors for high-frequency VRM10.0 applications.