ECS' AEC-Q200 Qualified Crystals are available in various compact, low profile packages and are suitable for harsh conditions
Bourns PortNote® solution illustrates how a polymer PTC can protect the DC bus during short circuit testing as recommended by USB 3.1 Section 188.8.131.52.1.
Bourns' Model PSM60 is suitable for use in automated professional audio mixing consoles, broadcast mixing consoles, and professional lighting consoles and controllers.
Nichicon’s UCH series is a -40⁰C to 125⁰C low impedance surface mount aluminum electrolytic capacitor featuring a low temperature ESR specification.
Soft termination MLCCs from TAIYO YUDEN are AEC-Q200 qualified capacitors with improved resistance to bending of substrate due to soft termination.
TDK Corporation offers their high temperature resistant MLCCs with soft terminations, expanding the CGA series of MLCCs for automotive applications
The KM Series 32 kHz Crystal Oscillator XO from Pericom has a superior performance for a wide range of applications.
TDK's TFM201610ALM series power inductors are miniature, low-profile, thin-film, metal, magnetic inductors for power circuits featuring up to twice the rated current and half the DC resistance of comparable ferrite inductors.
TDK's TCM0403R series supports the high-density mounting of electronic components and contributes to significant space-savings in electronic devices
TDK has developed a series of multi-layer power inductors for use in near field communication (NFC) and power line applications
TDK's FG series is a high reliability consumer/automotive grade, halogen-free ceramic capacitors with dipped radial leads
Nichicon’s UCV series is a small sized low impedance surface mount aluminum electrolytic capacitor.
Riedon’s HTE series uses thick film technology in a non-inductive cylindrical construction for through-hole mounting.
Murata’s two series of supercapacitors (EDLCs), which are the DMT series and the DMF series, feature the lowest levels of ESR throughout the industry.
The MSR series from Riedon uses a bare metal element in an all-welded construction for through-hole circuit board mounting to provide resistance values from 5 mΩ to 100 mΩ.
Kemet's automotive grade, high voltage, high temperature surface-mount MLCCs meet the demanding AEC-Q200 qualification requirements.
TDK’s MCZ Series Common Mode Filters were designed for use in high-speed and ultra-high-speed differential signal lines.
TDK has developed the ACT45R type common mode filter for FlexRay systems.
TDK’s MMZ Series ferrite chip beads are used to suppress noise in both signal and power supply circuits.
TDK’s MPZ Series ferrite chip beads are used to suppress noise in both signal and power supply circuits.