PS2801-1-F3-A

Data Sheet  PN10251EJ04V0DS

 

12 

PS2801-1,PS2801-4

(4) Cautions 

• Fluxes 

    Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 

 

2. Cautions regarding noise 

Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between 

collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute 

maximum ratings. 

 

3. Measurement conditions of current transfer ratios (CTR), which differ according to photocoupler 

Check the setting values before use, since the forward current conditions at CTR measurement differ according 

to product. 

When using products other than at the specified forward current, the characteristics curves may differ from the 

standard curves due to CTR value variations or the like. This tendency may sometimes be obvious, especially 

below I

F

 = 1 mA. 

Therefore, check the characteristics under the actual operating conditions and thoroughly take variations or the 

like into consideration before use. 

 

USAGE  CAUTIONS 

1.  Protect against static electricity when handling. 

2.  Avoid storage at a high temperature and high humidity. 

 

PS2801-1-F3-A Datasheet Related Products:
PS2801-1-F3-A Information:
Part No.
PS2801-1-F3-A
Description
OPTOISOLATOR 2.5KV TRANS 4-SSOP
File Size
238375 bytes
Page Size
595 x 842 pts (A4)
All Pages
16
Manufacturer
CEL (California Eastern Laboratories)
Homepage
http://www.cel.com/
Logo