PS2801-1-F3-A

Data Sheet  PN10251EJ04V0DS

 

11 

PS2801-1,PS2801-4

NOTES  ON  HANDLING 

 

1. Recommended soldering conditions 

(1) Infrared reflow soldering 

• Peak reflow temperature 

260

°C or below (package surface temperature) 

• Time of peak reflow temperature 

10 seconds or less 

• Time of temperature higher than 220

°C 

60 seconds or less 

• Time to preheat temperature from 120 to 180

°C 120±30 s 

• Number of reflows 

Three 

• Flux 

Rosin flux containing small amount of chlorine (The flux with a 

maximum chlorine content of 0.2 Wt% is recommended.) 

 

120±30 s

(preheating)

220

°

C

180

°

C

Package Surface Temperature  T (

°

C)

Time (s)

Recommended Temperature Profile of Infrared Reflow

(heating)

to 10 s

to 60 s

260

°

C MAX.

120

°

C

 

 

(2) Wave soldering 

• Temperature 

260

°C or below (molten solder temperature) 

•  Time 

10 seconds or less 

• Preheating conditions 

120

°C or below (package surface temperature) 

•  Number of times 

One (Allowed to be dipped in solder including plastic mold portion.) 

•  Flux 

Rosin flux containing small amount of chlorine (The flux with a maximum chlorine 

content of 0.2 Wt% is recommended.) 

 

(3) Soldering by soldering iron 

•  Peak temperature (lead part temperature) 

350

°C or below  

•  Time (each pins) 

 

3 seconds or less 

•  Flux 

Rosin flux containing small amount of chlorine (The flux with a 

maximum chlorine content of 0.2 Wt% is recommended.) 

  

 (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead. 

 (b) Please be sure that the temperature of the package would not be heated over 100

°C. 

 

 

PS2801-1-F3-A Datasheet Related Products:
PS2801-1-F3-A Information:
Part No.
PS2801-1-F3-A
Description
OPTOISOLATOR 2.5KV TRANS 4-SSOP
File Size
238375 bytes
Page Size
595 x 842 pts (A4)
All Pages
16
Manufacturer
CEL (California Eastern Laboratories)
Homepage
http://www.cel.com/
Logo